Six-node shell element (S6) next up previous contents
Next: Eight-node shell element (S8 Up: Element Types Previous: Fifteen-node wedge element (C3D15   Contents


Six-node shell element (S6)

This is a general purpose triangular shell element. The node numbering and the direction of the normal to the surface is shown in Figure 38.

Figure 38: 6-node triangular element
\begin{figure}\epsfig{file=C2D6.eps,width=8cm}\end{figure}

In CalculiX, six-node shell elements are expanded into three-dimensional wedge elements. The way in which this is done is illustrated in Figure 39. For more information on shell elements the reader is referred to the eight-node shell element in the next section.

Figure 39: Expansion of a 2D 6-node element into a 3D wedge element
\begin{figure}\epsfig{file=C2Dtri.eps,width=12cm}\end{figure}


guido dhondt 2011-03-26